Annual Review Of Fluid Mechanics Research Articles

Deformation and Breakup of Bubbles and Drops in Turbulence

Fragmentation of bubbles and droplets in turbulence produces a dispersed phase spanning a broad range of scales, encompassing everything from droplets in nanoemulsions to centimeter-sized bubbles entrained in breaking waves. Along with deformation, fragmentation plays a crucial role in enhancing interfacial area, with far-reaching implications across various industries, including food, pharmaceuticals, and ocean engineering. However, understanding and modeling these processes are challenging due to the complexity of anisotropic and inhomogeneous turbulence typically involved, the unknown residence time in regions with different turbulence intensities, and difficulties arising from the density and viscosity ratios. Despite these challenges, recent advances have provided new insights into the underlying physics of deformation and fragmentation in turbulence. This review summarizes existing works in various fields, highlighting key results and uncertainties, and examining the impact on turbulence modulation, drag reduction, and heat and mass transfer.

Fluid Dynamics of Airtanker Firefighting

Airtanker firefighting is the most spectacular tool used to fight wildland fires. However, it employs a rudimentary large-scale spraying technology operating at a high speed and a long distance from the target. This review gives an overview of the fluid dynamics processes that govern this practice, which are characterized by rich and varied physical phenomena. The liquid column penetration in the air, its large-scale fragmentation, and an intense surface atomization give shape to the rainfall produced by the airtanker and the deposition of the final product on the ground. The cloud dynamics is controlled by droplet breakup, evaporation, and wind dispersion. The process of liquid deposition onto the forest canopy is full of open questions of great interest for rainfall retention in vegetation. Of major importance, but still requiring investigation, is the role of the complex non-Newtonian viscoelastic and shear-thinning behavior of the retardant dropped to stop the fire propagation. The review describes the need for future research devoted to the subject.

Multiscale Velocity Gradients in Turbulence

Understanding and predicting turbulent flow phenomena remain a challenge for both theory and applications. The nonlinear and nonlocal character of small-scale turbulence can be comprehensively described in terms of the velocity gradients, which determine fundamental quantities like dissipation, enstrophy, and the small-scale topology of turbulence. The dynamical equation for the velocity gradient succinctly encapsulates the nonlinear physics of turbulence; it offers an intuitive description of a host of turbulence phenomena and enables establishing connections between turbulent dynamics, statistics, and flow structure. The consideration of filtered velocity gradients enriches this view to express the multiscale aspects of nonlinearity and flow structure in a formulation directly applicable to large-eddy simulations. Driven by theoretical advances together with growing computational and experimental capabilities, recent activities in this area have elucidated key aspects of turbulence physics and advanced modeling capabilities.

The Early Days and Rise of Turbulence Simulation

This review highlights major developments and milestones during the early days of numerical simulation of turbulent flows and its use to increase our understanding of turbulence phenomena. The period covered starts with the first simulations of decaying homogeneous isotropic turbulence in 1971–1972 and ends about 25 years later. Some earlier history of the progress in weather prediction is included if relevant. Only direct simulation, in which all scales of turbulence are accounted for explicitly, and large-eddy simulation, in which the effect of the smaller scales is modeled, are discussed. The method by which all scales are modeled, Reynolds-averaged Navier–Stokes, is not covered.

Statistical Models for the Dynamics of Heavy Particles in Turbulence

When very small particles are suspended in a fluid in motion, they tend to follow the flow. How such tracer particles are mixed, transported, and dispersed by turbulent flow has been successfully described by statistical models. Heavy particles, with mass densities larger than that of the carrying fluid, can detach from the flow. This results in preferential sampling, small-scale fractal clustering, and large relative velocities. To describe these effects of particle inertia, one must consider both particle positions and velocities in phase space. In recent years, statistical phase-space models have significantly contributed to our understanding of inertial-particle dynamics in turbulence. These models help to identify the key mechanisms and nondimensional parameters governing the particle dynamics and have made qualitative and, in some cases, quantitative predictions. This article reviews statistical phase-space models for the dynamics of small, yet heavy, spherical particles in turbulence. We evaluate their effectiveness by comparing their predictions with results from numerical simulations and laboratory experiments, and we summarize their successes and failures.

The Dynamics of Jupiter's and Saturn's Weather Layers: A Synthesis After Cassini and Juno

Until recently, observations of the giant planets of our Solar System were confined to sampling relatively shallow regions of their atmospheres, leaving many uncertainties as to the dynamics of deeper layers. The Cassini and Juno missions to Saturn and Jupiter, however, have begun to address these issues, for example, by measuring their gravity and magnetic fields. The results show that the zonally coherent jets and cloud bands extend to levels where the electrical conductivity of the fluid becomes significant, whereas large-scale vortices, such as the Great Red Spot, are relatively shallow but may have deep-seated roots. The polar regions also exhibit intense cyclonic vortices that, on Jupiter, arrange themselves into remarkably regular “vortex crystals.” Numerical models seem able to capture some of this complexity, but many issues remain unresolved, suggesting a need for models that can represent both deep and shallow processes sufficiently realistic ally to compare with observations.

Large-Scale Eddy-Mean Flow Interaction in the Earth's Extratropical Atmosphere

Large-scale circulation of the atmosphere in the Earth's extratropics is dominated by eddies, eastward (westerly) zonal winds, and their interaction. Eddies not only bring about weather variabilities but also help maintain the average state of climate. In recent years, our understanding of how large-scale eddies and mean flows interact in the extratropical atmosphere has advanced significantly due to new dynamical constraints on finite-amplitude eddies and the related eddy-free reference state. This article reviews the theoretical foundations for finite-amplitude Rossby wave activity and related concepts. Theory is then applied to atmospheric data to elucidate how angular momentum is redistributed by the generation, transmission, and dissipation of Rossby waves and to reveal how an anomalously large wave event such as atmospheric blocking may arise from regional eddy-mean flow interaction.

Gas–Particle Dynamics in High-Speed Flows

High-speed disperse multiphase flows are present in numerous environmental and engineering applications with complex interactions between turbulence, shock waves, and particles. Compared with its incompressible counterpart, compressible two-phase flows introduce new scales of motion that challenge simulations and experiments. This review focuses on gas–particle interactions spanning subsonic to supersonic flow conditions. An overview of existing Mach-number-dependent drag laws is presented, with origins from eighteenth-century cannon firings and new insights from particle-resolved numerical simulations. The equations of motion and phenomenology for a single particle are first reviewed. Multiparticle systems spanning dusty gases to dense suspensions are then discussed from numerical and experimental perspectives.

Bubble Plumes in Nature

Bubble plumes are ubiquitous in nature. Instances in the natural world include the release of methane and carbon dioxide from the seabed or the bottom of a lake and from a subsea oil well blowout. This review describes the dynamics of bubble plumes and their various spreading patterns in the surrounding environment. We explore how the motion of the plume is affected by the density stratification in the external environment, as well as by internal processes of dissolution of the bubbles and chemical reaction. We discuss several examples, such as natural disasters, global warming, and fishing techniques used by some whales and dolphins.

Building Ventilation: The Consequences for Personal Exposure

Ventilation is central to human civilization. Without it, the indoor environment rapidly becomes uncomfortable or dangerous, but too much ventilation can be expensive. We spend much of our time indoors, where we are exposed to pollutants and can be infected by airborne diseases. Ventilation removes pollution and bioaerosols from indoor sources but also brings in pollution from outdoors. To determine an appropriate level of ventilation and an appropriate way of providing it, one must understand that the needs for ventilation extend beyond simple thermal comfort; the quality of indoor air is at least as important. An effective ventilation system will remove unwanted contaminants, whether generated within the space by activities or by the simple act of breathing, and ensure that the ventilation system does not itself introduce or spread contaminants from elsewhere. This review explores how ventilation flows in buildings influence personal exposure to indoor pollutants and the spread of airborne diseases.

The Fluid Mechanics of Female Reproduction: A Review of the Biofluid Mechanics of Pregnancy and Delivery

Reproductive biomechanics, a broad and developing field, contains fluid mechanics problems at every stage. In particular, the human female reproductive system is a complex and dynamic fluid-structure system. Until recently, the majority of this research focused on the early moments of reproduction—namely, the transport phenomena that dominate fertilization and implantation. However, in the past two decades, fluid mechanics has begun to be used in investigations of all aspects surrounding pregnancy, labor, and delivery. In this review, we discuss human reproduction starting with the nonpregnant uterus through implantation, delivery, and lactation and breastfeeding. We cover physiologic changes from the transformation of the uterus and the cervical remodeling process to the development of the placenta and the beginning of lactation. We examine the role of reproductive fluids such as amniotic fluid and vernix caseosa, and how force is transferred during labor.

Vortices and Forces in Biological Flight: Insects, Birds, and Bats

Insects, birds, and bats that power and control flight by flapping their wings perform excellent flight stability and maneuverability by rapidly and continuously varying their wing motions. This article provides an overview of the state of the art of vortex-dominated, unsteady flapping aerodynamics from the viewpoint of diversity and uniformity associated with dominant vortices, particularly of the relevant physical aspects of the flight of insects and vertebrates in the low- and intermediate-Reynolds-number ( Re) regime of 100 to 106. After briefly describing wing morphology and kinematics, we discuss the main vortices generated by flapping wings and the aerodynamic forces associated with these structures, focusing on leading-edge vortices (LEVs), wake vortices, and vortices generated by wing motions over a broad Re range. The LEVs are intensified by dynamic wing morphing in bird and bat flight, producing a significantly elevated vortex lift. The complex wake vortices are the footprints of lift generation; thus, the time-averaged vortex lift can be estimated from wake velocity data. Computational fluid dynamics modeling, quasi-steady models, and vortex lift models are useful tools to elucidate the intrinsic relationships between the lift and the dominant vortices in the near- and far-fields in flapping flight.

Fluid Dynamics of Squirmers and Ciliated Microorganisms

The fluid dynamics of microswimmers has received attention from the fields of microbiology, microrobotics, and active matter. Microorganisms have evolved organelles termed cilia for propulsion through liquids. Each cilium periodically performs effective and recovery strokes, creating a metachronal wave as a whole and developing a propulsive force. One well-established mathematical model of ciliary swimming is the squirmer model, which focuses on surface squirming velocities. This model is also useful when studying active colloids and droplets. The squirmer model has been recently used to investigate the behaviors of microswimmers in complex environments, their collective dynamics, and the characteristics of active fluids. Efforts have also been made to broaden the range of applications beyond the assortment permitted by the squirmer model, which was established to specifically represent ciliary flow and incorporate biological features. The stress swimmer model imposes stresses above the cell body surface that enforce the no-slip condition. The ciliated swimmer model precisely reproduces the behaviors of each cilium that engages in mutual hydrodynamic interactions. Mathematical models have improved our understanding of various microbial phenomena, including cell–cell and cell–wall interactions and energetics. Here, I review recent advances in the hydrodynamics of ciliary swimming and then discuss future challenges.

Flows Over Rotating Disks and Cones

Rotating-disk flows were first considered by von Kármán in a seminal paper in 1921, where boundary layers in general were discussed and, in two of the nine sections, results for the laminar and turbulent boundary layers over a rotating disk were presented. It was not until in 1955 that flow visualization discovered the existence of stationary cross-flow vortices on the disk prior to the transition to turbulence. The rotating disk can be seen as a special case of rotating cones, and recent research has shown that broad cones behave similarly to disks, whereas sharp cones are susceptible to a different type of instability. Here, we provide a review of the major developments since von Kármán's work from 100 years ago, regarding instability, transition, and turbulence in the boundary layers, and we include some analysis not previously published.

Turbulent Drag Reduction by Streamwise Traveling Waves of Wall-Normal Forcing

We review some fundamentals of turbulent drag reduction and the turbulent drag reduction techniques using streamwise traveling waves of blowing/suction from the wall and wall deformation. For both types of streamwise traveling wave controls, their significant drag reduction capabilities have been well confirmed by direct numerical simulation at relatively low Reynolds numbers. The drag reduction mechanisms by these streamwise traveling waves are considered to be the combination of direct effects due to pumping and indirect effects of the attenuation of velocity fluctuations due to reduced receptivity. Prediction of their drag reduction capabilities at higher Reynolds numbers and attempts at experimental validation are also intensively ongoing toward their practical implementation.

Gas Microfilms in Droplet Dynamics: When Do Drops Bounce?

In the last ten years, advances in experimental techniques have enabled remarkable discoveries of how the dynamics of thin gas films can profoundly influence the behavior of liquid droplets. Drops impacting onto solids can skate on a film of air so that they bounce off solids. For drop–drop collisions, this effect, which prevents coalescence, has been long recognized. Notably, the precise physical mechanisms governing these phenomena have been a topic of intense debate, leading to a synergistic interplay of experimental, theoretical, and computational approaches. This review attempts to synthesize our knowledge of when and how drops bounce, with a focus on ( a) the unconventional microscale and nanoscale physics required to predict transitions to/from merging and ( b) the development of computational models. This naturally leads to the exploration of an array of other topics, such as the Leidenfrost effect and dynamic wetting, in which gas films also play a prominent role.

Experiments on liquid film thickness around Taylor finger

Abstract Taylor finger is characterized by a single elongated air bubble that grows upward during the drainage of liquid from closed top vertical tubes. The characteristic of the Taylor finger is similar to the Taylor bubble commonly observed in gas–liquid two-phase flow. During the upward growth of the Taylor finger, liquid from the tube drains as a thin film around it. The exact prediction of film thickness is important in several engineering designs and process calculations such as the design of contacting devices, two-phase flow through porous media, boiling in tubes, and monolith reactors. The present study proposes an experimental technique to estimate the thickness of the draining liquid film. Based on experiments an empirical model has been proposed for non-dimensional film thickness in the inviscid region. The proposed model agrees well with the experimental data and equation proposed in published literatures (Davies, R. M., and G. Taylor. 1950. “The Mechanics of Large Bubbles Rising Through Extended Liquids and Through Liquids in Tubes.” Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 200, 375–90; Dukler, A. E., and J. Fabre. 1994. “Gas-Liquid Slug Flow.” Multiphase Science and Technology 8: 1–4; Fabre, J., and A. Liné. 1992. “Modeling of Two-Phase Slug Flow.” Annual Review of Fluid Mechanics 24: 21–46).

A library for wall-modelled large-eddy simulation based on OpenFOAM technology

This work presents a feature-rich open-source library for wall-modelled large-eddy simulation (WMLES), which is a turbulence modelling approach that reduces the computational cost of standard (wall-resolved) LES by introducing special treatment of the inner region of turbulent boundary layers (TBLs). The library is based on OpenFOAM and enhances the general-purpose LES solvers provided by this software with state-of-the-art wall modelling capability. The included wall models belong to the class of wall-stress models that account for the under-resolved turbulent structures by predicting and enforcing the correct local value of the wall shear stress. A review of this approach is given, followed by a detailed description of the library, discussing its functionality and extensible design. The included wall-stress models are presented, based on both algebraic and ordinary differential equations. To demonstrate the capabilities of the library, it was used for WMLES of turbulent channel flow and the flow over a backward-facing step (BFS). For each flow, a systematic simulation campaign was performed, in order to find a combination of numerical schemes, grid resolution and wall model type that would yield a good predictive accuracy for both the mean velocity field in the outer layer of the TBLs and the mean wall shear stress. The best result, ≈1% error in the above quantities, was achieved for channel flow using a mildly dissipative second-order accurate scheme for the convective fluxes applied on an isotropic grid with 27000 cells per δ3-cube, where δ is the channel half-height. In the case of flow over a BFS, this combination led to the best agreement with experimental data. An algebraic model based on Spalding’s law of the wall was found to perform well for both flows. On the other hand, the tested more complicated models, which incorporate the pressure gradient in the wall shear stress prediction, led to less accurate results. Program SummaryProgram Title: libWallModelledLESProgram Files doi:http://dx.doi.org/10.17632/m8dnsnp4nd.1Licensing provisions: GPLv3Programming language: C++Nature of problem: Large-eddy simulation (LES) is a scale-resolving turbulence modelling approach providing a high level of predictive accuracy. However, LES of high Reynolds number wall-bounded flows is prohibitively computationally expensive due to the need for resolving the inner region of turbulent boundary layers (TBLs) [1]. This inhibits the application of LES to many industrially relevant flows [2] and prompts for the development of novel modelling techniques that would modify the LES approach in a way that allows it to retain its accuracy (at least away from walls) yet significantly lower its computational cost. Solution method: Wall-modelled LES (WMLES) is an approach that is based on complementing LES with special near-wall modelling that allows to leave the inner layer of TBLs unresolved by the computational grid. Many types of wall models have been proposed [1,3], commonly tested within the framework of in-house research codes. Here, an open-source library implementing several wall models is presented. The library is based on OpenFOAM, which is currently the most widely used general-purpose open-source software for computational fluid dynamics. The developed library can be directly applied to both academic and industrial flow cases, leading to a wider adoption of wall modelling and better understanding of its strengths and limitations.[1] J. Larsson, S. Kawai, J. Bodart, and I. Bermejo-Moreno. Large eddy simulation with modeled wall-stress: recent progress and future directions. Mechanical Engineering Reviews, 3(1):1-23, 2016.[2] J. Slotnick, A. Khodadoust, J. Alonso, D. Darmofal, W. Gropp, E. Lurie, D. Mavriplis. CFD vision 2030 study: A path to revolutionary computational aerosciences, Tech. rep., NASA, 2014.[3] S. T. Bose and G. I. Park. Wall-modeled large-eddy simulation for complex turbulent flows. Annual Review of Fluid Mechanics, 50(1):535–561, 2018.

LB3D: A parallel implementation of the Lattice-Boltzmann method for simulation of interacting amphiphilic fluids

We introduce the lattice-Boltzmann code LB3D, version 7.1. Building on a parallel program and supporting tools which have enabled research utilising high performance computing resources for nearly two decades, LB3D version 7 provides a subset of the research code functionality as an open source project. Here, we describe the theoretical basis of the algorithm as well as computational aspects of the implementation. The software package is validated against simulations of meso-phases resulting from self-assembly in ternary fluid mixtures comprising immiscible and amphiphilic components such as water–oil–surfactant systems. The impact of the surfactant species on the dynamics of spinodal decomposition are tested and quantitative measurement of the permeability of a body centred cubic (BCC) model porous medium for a simple binary mixture is described. Single-core performance and scaling behaviour of the code are reported for simulations on current supercomputer architectures. Program summaryProgram Title: LB3DProgram Files doi:http://dx.doi.org/10.17632/9g9x2wr8z8.1Licensing provisions: BSD 3-clauseProgramming language: FORTRAN90, Python, CNature of problem: Solution of the hydrodynamics of single phase, binary immiscible and ternary amphiphilic fluids. Simulation of fluid mixtures comprising miscible and immiscible fluid components as well as amphiphilic species on the mesoscopic scale. Observable phenomena include self-organisation of mesoscopic complex fluid phases and fluid transport in porous media.Solution method: Lattice-Boltzmann (lattice-Bhatnagar–Gross–Krook, LBGK) [1, 2, 3] method describing fluid dynamics in terms of the single particle velocity distribution function in a 3-dimensional discrete phase space (D3Q19) [4, 5, 6]. Multiphase interactions are modelled using a phenomenological pseudo-potential approach [7, 8] with amphiphilic interactions utilising an additional dipole field [9, 10]. Solid boundaries are modelled using simple bounce-back boundary conditions and additional pseudo-potential wetting interactions [11].Additional comments including Restrictions and Unusual features: The purpose of the release is the provision of a refactored minimal version of LB3D suitable as a starting point for the integration of additional features building on the parallel computation and IO functionality. [1]S. Succi, The Lattice Boltzmann Equation: For Fluid Dynamics and Beyond, Oxford University Press, 2001.[2]B. Dünweg, A. Ladd, Lattice Boltzmann simulations of soft matter systems, Adv. Poly. Sci. 221 (2009) 89–166[3]C. K. Aidun, J. R. Clausen, Lattice-Boltzmann Method for Complex Flows, Annual Review of Fluid Mechanics 42 (2010) 439.[4]X. He, L.-S. Luo, A priori derivation of the lattice-Boltzmann equation, Phys. Rev. E 55 (1997) R6333.[5]X. He, L.-S. Luo, Theory of the lattice Boltzmann method: from the Boltzmann equation to the lattice Boltzmann equation, Phys. Rev. E 56.[6]Y. H. Qian, D. D’Humiéres, P. Lallemand, Lattice BGK Models for Navier–Stokes Equation, Europhysics Letters 17 (1992) 479.[7]X. Shan, H. Chen, Lattice-Boltzmann model for simulating flows with multiple phases and components, Physical Review E 47 (1993) 1815.[8]X. Shan, G. Doolen, Multicomponent lattice-Boltzmann model with interparticle interaction, Journal of Statistical Physics 81 (1995) 379.[9]H. Chen, B. Boghosian, P.V. Coveney, M. Nekovee, A ternary lattice-Boltzmann model for amphiphilic fluids, Proceedings of the Royal Society of London A 456 (2000) 2043.[10]M. Nekovee, P. V. Coveney, H. Chen, B. M. Boghosian, Lattice-Boltzmann model for interacting amphiphilic fluids, Phys. Rev. E 62 (2000) 8282.[11]N. S. Martys, H. Chen, Simulation of multicomponent fluids in complex three-dimensional geometries by the lattice-Boltzmann method, Phys. Rev. E 53 (1996) 743.

The Origin of the Volcanological Concept Nuee ardente

Previous articleNext article No AccessThe Origin of the Volcanological Concept Nuee ardenteMarjorie HookerMarjorie Hooker Search for more articles by this author PDFPDF PLUS Add to favoritesDownload CitationTrack CitationsPermissionsReprints Share onFacebookTwitterLinkedInRedditEmail SectionsMoreDetailsFiguresReferencesCited by Isis Volume 56, Number 4Winter, 1965 Publication of the History of Science Society Article DOIhttps://doi.org/10.1086/350041 Views: 3Total views on this site Citations: 2Citations are reported from Crossref Copyright 1966 History of Science Society, Inc.PDF download Crossref reports the following articles citing this article:Josef Dufek The Fluid Mechanics of Pyroclastic Density Currents, Annual Review of Fluid Mechanics 48, no.11 (Jan 2016): 459–485.https://doi.org/10.1146/annurev-fluid-122414-034252 Robert P. Multhauf , Bernard S. Finn , Aleida Cattell Renwick , and Diana Davis Menkes Ninety-First Critical Bibliography of the History of Science and Its Cultural Influences (To 1 January 1966), Isis 57, no.44 (Oct 2015): 516–644.https://doi.org/10.1086/350179